Expert Guides!
Expert Guides!
Antelco is a leading Australian manufacturer specialising in high-quality, low-volume micro irrigation products designed for efficient, sustainable watering. Their expertise ensures each component is designed with precision and built for performance in a wide range of environments.
Filters
4.5 / 5.0
6 Reviews
The Vari-Flow Mister Micro Jet produces a delicate plume of mist for gentle watering of fragile plants. The spray provides uniform coverage and is ...
View full details5.0 / 5.0
2 Reviews
The 13mm barb to 1" male threaded fitting is used for connecting supply pipe to accessories with 1" female threads - such as solenoid valves and ma...
View full details5.0 / 5.0
3 Reviews
The CETA 4LPH Dripper on a spike is a pressure compensating drip emitter that is designed to deliver a pre-set amount of water at varying inlet pre...
View full details5.0 / 5.0
4 Reviews
Allow various additional runs from the 13mm supply pipe in a watering system. Great for vegetable gardens and greenhouses. Made to a high quality f...
View full details4.25 / 5.0
4 Reviews
The In-Line CETA 4LPH Dripper on a spike is a pressure compensating drip emitter that is designed to deliver a pre-set amount of water at a wide ra...
View full details5.0 / 5.0
1 Review
Elbow connectors are used to avoid obstacles and navigate the garden. Turn 90° corners without kinking 14mm drip line. These are useful to ensure a...
View full details5.0 / 5.0
2 Reviews
The Asta Stake is used in conjunction with a rigid riser to create a height adjustable stake. Used to install micro jets, sprays and mini sprinkler...
View full details5.0 / 5.0
5 Reviews
It is easier to clean a single filter than many emitters. An effective filter like this protects downstream components and is an important feature ...
View full details5.0 / 5.0
2 Reviews
The Tee connectors are used to branch off extra lines of the 13mm irrigation supply pipe or to split the pipe in two directions. Especially useful ...
View full details5.0 / 5.0
3 Reviews
The end sleeve is used to terminate runs of 13mm supply pipe. Needed in garden watering systems to prevent water from escaping from the end of pipe...
View full details4.75 / 5.0
4 Reviews
The 180° adjustable flow dripper on a spike allows you to choose the flow of water from anything between 1 - 40 litres per hour. Flow can also be t...
View full details5.0 / 5.0
4 Reviews
The CETA 8LPH Dripper is a pressure compensating drip emitter that is designed to deliver a pre-set amount of water at varying inlet pressures (1 ‚...
View full details4.666666667 / 5.0
3 Reviews
The CFd Downspray on Asta Stake provides an even and gentle water coverage over a small full circle area. Pre-assembled for quick installation, can...
View full details4.0 / 5.0
2 Reviews
Use the nut and tail adaptor to connect 13mm supply pipe to inlets/outlets with a 1" BSP thread. Has a barbed outlet specifically designed to fit ...
View full detailsThe supply pipe ratchet clamps are used to fasten the 19mm LDPE supply pipe to irrigation fittings. Especially useful for garden watering systems w...
View full details4.5 / 5.0
2 Reviews
The 3/4" Threaded Elbow connector is used for connecting pop up sprinklers to 13mm supply pipe. Use the Threaded T connector to for connecting pop ...
View full details4.75 / 5.0
4 Reviews
The Spectrum 360° adjustable flow spray with a 4mm threaded inlet is a vortex sprayer that provides full circle coverage of fine water droplets ove...
View full details4.833333333 / 5.0
6 Reviews
The Pressure Compensating Dripper is a fixed-diameter drip emitter designed to maintain throw over a wide range of inlet pressures (1 - 3.5 bar). T...
View full details5.0 / 5.0
1 Review
The drip line ratchet clamps fasten the 14mm drip line to irrigation fittings. Especially useful for garden watering systems with high water pressu...
View full details4.5 / 5.0
4 Reviews
The Asta Stake is used in conjunction with a rigid riser to create a height adjustable stake. Used to install micro-jets, sprays and mini sprinkle...
View full detailsUse the nut and tail adaptor to connect 19mm supply pipe to garden taps and automatic water timers. Fits 3/4" BSP threads and has a barb outlet spe...
View full detailsElbow connectors are used to avoid obstacles and navigate the garden. Turn 90° corners without kinking 19mm LDPE supply pipe. These are useful to e...
View full detailsThe 13mm barb to 1/2" male threaded fitting is used for connecting supply pipe to accessories with 1/2" female threads - such as pop up sprinklers,...
View full details5.0 / 5.0
1 Review
Allows a threaded fitting with a 3/4" BSPF thread to attach to a larger 1" BSPM garden tap or other water outlet types. A sealing washer is include...
View full detailsAdded to your cart: