Antelco

For applications requiring a higher flow rate, the Mini Bubbler 360° Dripper is a perfect choice. With an adjustable flow rate between 0 - 120 litr...

The Spectrum 360° adjustable flow spray with 4mm barb inlet is a vortex sprayer that provides full circle coverage of fine water droplets over an a...

The 3/4" Threaded Tee connector is used for connecting pop up sprinklers in series with 13mm supply pipe. Use a Threaded Elbow connector to finish ...

The 180° adjustable flow dripper with 4mm barb inlet allows you to set the flow of water to anything between 1 - 40 litres per hour. You can also c...

Most UK standard garden taps have a 3/4" male threads on their outlet. Use this to allow a connection of 1" BSP female threaded fittings to a stand...

Straight connectors are used for making repairs and extending 19mm LDPE irrigation pipe. Made from UV stable material to ensure a long life in the ...

This double barb reducing joiner is used to connect the 13mm irrigation pipe to 14mm irrigation pipe. Can also be used to join 13mm pipe to 14mm dr...

The CFd Downspray on Wire Stake with Shut-Off clip provides an even and gentle water coverage over a small full circle area. Pre-assembled for quic...

Replacement rubber sealing washer suitable for 3/4" BSPF fittings ensures a good seal when using tap connectors/fittings/caps. 3/4" BSP is the stan...

The stop end connector is used to terminate runs of 19mm LDPE supply pipe. Needed in garden watering systems to prevent water from escaping out the...

To make ordering easy, we have put together a connector combo pack containing all the essential fittings typically used when installing irrigation ...

The Tee connectors are used to branch off extra lines of the 19mm LDPE irrigation pipe or to split the pipe in two directions. Especially useful fo...

The 360° adjustable flow dripper with 4mm threaded inlet allows you to set the flow of water to anything between 1 - 40 litres per hour. Flow can a...

The Inverted Fixed Flow Rotor Sprays provide excellent distribution uniformity via a full flow flipper. The flipper is suspended between two bearin...

The Midi Drip Emitter is a simple fixed flow dripper with a 4 litre per hour flow rate. The barb inlet fits to 4mm micro supply pipe. The dripper c...

The Rotor Max Sprinkler on Jumbo Stake with Tube is a pre-assembled midi sprinkler installed on a stake ready for installation. The Rotor Max Midi ...

The Supply Pipe Nail in Wall Clips is an easy way to secure 19mm LDPE supply pipe to walls and fences. Made from UV-stable plastic and plated pins ...

Elbow connectors are used to avoid obstacles and navigate the garden. Turn 90° corners without kinking 19mm LDPE supply pipe. These are useful to e...

The Midi Drip Emitter on a spike is a simple fixed flow dripper with a 4 litre per hour flow rate. The barb inlet fits 4mm micro supply pipe. The s...

The 3/4" male threaded to 13mm barb flow control is used for connecting supply pipe to accessories with 3/4" female threads - such as quick release...

The Supply Pipe Wall Clamps are used to secure the 19mm LDPE supply pipe to walls and fences. Made from UV-stable material for a long life. Require...

The stop end connector is used to terminate runs of 19mm LDPE supply pipe. Needed in garden watering systems to prevent water escaping from the end...

Straight connectors are used for making repairs and extending 19mm LDPE supply pipe. Made from UV stable material to ensure a long life in the sun....