Claber Colibri Complete Lawn Watering Kit - 50m²

The introduction of the Claber Colibri complete lawn watering kit has meant homeowners can quickly and easily install a pop-up sprinkler system for themselves at an affordable price. This lawn watering kit is designed for areas measuring 50m² and can be extended to cover areas up to 200m² by purchasing additional Colibri sprinklers and accessories. Because of the unique design of the Colibri pop-up sprinklers, this kit can easily be run from a low-pressure water supply. When in use, the pop-up sprinklers rise out of the ground and evenly waters your lawn with a gentle uniform rain effect, and then retract back underground when the system is turned off. For full automation, purchase a water timer to time when the watering system is turned on and off.

For a limited time only:
Get 15% Off a Claber Logica Plus Water Timer when bought with this kit.

Product Details:

• Uniform coverage with gentle rain effect.
• Covers an area of up to 50 metres².
• Supplied with everything required for set up.
• Comes with comprehensive installation instructions.
• Works with low-pressure water supplies (min 1.5 bar pressure).
• Easily extend for larger areas up to 200 metres².
• Covered by Claber's 2-year manufacturer's warranty.

Note: This product requires a minimum flow of 16 litres per minute and a minimum pressure of 1.5 bar from your water source to work.

• 4 x 180 Degree Colibri Pop-ups
• 1 x 360 Degree Colibri Pop-ups
• 3 x Threaded Tee's
• 2 x Threaded Elbows
• 2 x Tee's
• 4 x Elbow Connectors
• 1 x Tap/Timer Adapter
• 1 x Drain Plug
• 24 x Clips
• 25 Metres of 13mm Supply Hose.

Q. What water availability is necessary for a Colibrì System irrigation system for proper operation?

For the proper functioning of a Colibri system we recommend using a water source with a minimum pressure of 2 / 2.5 bar and a minimum flow rate of 14-16 l / min.

Q: How do I determine the water pressure from my garden tap?

To determine water pressure, you need to use a water pressure gauge. These can be found in hardware stores for about £20. Simply fit onto the outlet of the tap you are using, and then turn the tap on to get a reading. View more details here.

Q: How do I measure the flow rate from my garden tap?

Calculating water flow is quite straightforward. All you need is a bucket and a stopwatch. It doesn't matter what size bucket you use, but you need to know its volume. In the example below, we'll use a 5-litre bucket. Time how long it takes to fill the bucket from your garden tap in seconds. When you know how long it takes to fill 5 litres (we'll use 15 seconds in our example), you can use the calculations below to determine the flow rate:

• Litres per Minute = (Bucket Size (5 Litres) ÷ Time in Seconds (15)) x 60
• Litres per Hour = use calculation above and multiply by another 60

Q: What is the performance of the Colibri sprinklers?

For the operating pressure and performance of each sprinkler, refer to the table below.