The Claber Colibri complete lawn watering kit allows homeowners to easily install a pop-up sprinkler system at an affordable price.
Designed to cover areas up to 200m², this kit includes all the necessary parts to complete the installation.
The unique design of the Colibri pop-up sprinklers allows this kit to run efficiently from a low-pressure water supply.
When in use, the pop-up sprinklers rise out of the ground and evenly water your lawn with a gentle, uniform rain effect.
The pop-up sprinklers retract underground when the system is turned off, leaving your lawn clear and free of any obstructions.
The introduction of the Claber Colibri complete lawn watering kit has meant homeowners can quickly and easily install a pop-up sprinkler system for themselves at an affordable price. This lawn watering kit is designed to cover areas up to 200m² and includes all the necessary parts to complete the installation. Because of the unique design of the Colibri pop-up sprinklers, this kit can efficiently be run from a low-pressure water supply. When in use, the pop-up sprinklers rise out of the ground and evenly water your lawn with a gentle, uniform rain effect, and then retract underground when the system is turned off. For full automation, purchase a Claber Duplo Water Timer to set when the watering system should turn on and off.
Supplied with everything required for a two-zone setup.
Comes with comprehensive installation instructions.
Works with low-pressure water supplies (min 1.5 bar pressure).
Covered by Claber's 2-year manufacturer's warranty.
* image is for illustrative purposes only. Check the component list for accurate details.
For the operating pressure and performance of each sprinkler, refer to the table below.
10 x 180 Degree Colibri Pop-ups
2 x 360 Degree Colibri Pop-ups
10 x Threaded Tees
2 x Threaded Elbows
2 x Tees
5 x Elbow Connectors
2 x Tap/Timer Adapters
1 x Two-Way Tap Splitter
2 x Drain Plugs
42 x Pipe Clamps
3 x 25 Metres of 13mm Supply Hose.
Q. What water availability is necessary for a Colibrì System irrigation system for proper operation?
For the proper functioning of a Colibri system, we recommend using a water source with a minimum pressure of 2 / 2.5 bar and a minimum flow rate of 16-18 l / min. Check the performance table below to determine exact flow requirements based on the water pressure of your water source.
Q: How do I determine the water pressure from my garden tap?
To determine water pressure, you need to use a water pressure gauge. These can be found in hardware stores for about £20. Simply fit onto the outlet of the tap you are using, and then turn the tap on to get a reading. View more details here.
Q: How do I measure the flow rate from my garden tap?
Calculating water flow is quite straightforward. All you need is a bucket and a stopwatch. It doesn't matter what size bucket you use, but you need to know its volume. In the example below, we'll use a 5-litre bucket. Time how long it takes to fill the bucket from your garden tap in seconds. When you know how long it takes to fill 5 litres (we'll use 15 seconds in our example), you can use the calculations below to determine the flow rate:
Litres per Minute = (Bucket Size (5 Litres) ÷ Time in Seconds (15)) x 60
Litres per Hour = use calculation above and multiply by another 60
Q: What is the performance of the Colibri sprinklers?
For the operating pressure and performance of each sprinkler, refer to the table in the product description.