The introduction of the Claber Colibri complete lawn watering kit has meant homeowners can quickly and easily install a pop-up sprinkler system for themselves at an affordable price. This lawn watering kit is designed to cover areas up to 200m² and includes all the necessary parts to complete the installation. Because of the unique design of the Colibri pop-up sprinklers, this kit can easily be run from a low-pressure water supply. When in use, the pop-up sprinklers rise out of the ground and evenly water your lawn with a gentle uniform rain effect, and then retract back underground when the system is turned off. For full automation, purchase a Claber Duplo Water Timer to set the time when the watering system should turn on and off.
For a limited time only:
Buy a Colibri Complete Lawn Watering Kit and get 15% off Claber Duplo Water Timer.
- Uniform coverage with a gentle rain effect.
- Covers an area of up to 200 metres².
- Supplied with everything required for a two-zone setup.
- Comes with comprehensive installation instructions.
- Works with low-pressure water supplies (min 1.5 bar pressure).
- Covered by Claber's 2-year manufacturer's warranty.
Note: This product requires a minimum flow of 16 litres per minute and a minimum pressure of 1.5 bar from your water source to work. Requirements are based on a two-zone layout.
* image is for illustrative purposes only. Check the component list for accurate details.
- 10 x 180 Degree Colibri Pop-ups
- 2 x 360 Degree Colibri Pop-ups
- 10 x Threaded Tees
- 2 x Threaded Elbows
- 2 x Tees
- 5 x Elbow Connectors
- 2 x Tap/Timer Adapters
- 1 x Two-Way Tap Splitter
- 2 x Drain Plugs
- 42 x Pipe Clamps
- 3 x 25 Metres of 13mm Supply Hose.
Frequently Asked Questions
Q. What water availability is necessary for a Colibrì System irrigation system for proper operation?
For the proper functioning of a Colibri system, we recommend using a water source with a minimum pressure of 2 / 2.5 bar and a minimum flow rate of 16-18 l / min.
Q. Can I run all of the sprinklers in this kit at the same time?
It is not possible to operate more than six sprinklers at a time. As this kit comes with twelve sprinklers, you will need to divide the system into two zones and ensure they are operated at different times. The kit is supplied with everything you need to achieve this.
Q: How do I determine the water pressure from my garden tap?
To determine water pressure, you need to use a water pressure gauge. These can be found in hardware stores for about £20. Simply fit onto the outlet of the tap you are using, and then turn the tap on to get a reading. View more details here.
Q: How do I measure the flow rate from my garden tap?
Calculating water flow is quite straightforward. All you need is a bucket and a stopwatch. It doesn't matter what size bucket you use, but you need to know its volume. In the example below, we'll use a 5-litre bucket. Time how long it takes to fill the bucket from your garden tap in seconds. When you know how long it takes to fill 5 litres (we'll use 15 seconds in our example), you can use the calculations below to determine the flow rate:
- Litres per Minute = (Bucket Size (5 Litres) ÷ Time in Seconds (15)) x 60
- Litres per Hour = use the calculation above and multiply by another 60
Q: What is the performance of the Colibri sprinklers?
For the operating pressure and performance of each sprinkler, refer to the table below.